The NVIDIA Accelerated Linux Driver Set consists of the following components (filenames in parenthesis are the full names of the components after installation; "x.y.z" denotes the current version. In these cases appropriate symlinks are created during installation):
An X driver (/usr/X11R6/lib/modules/drivers/nvidia_drv.so); this driver is needed by the X server to use your NVIDIA hardware.
A GLX extension module for X (/usr/X11R6/lib/modules/extensions/libglx.so.x.y.z); this module is used by the X server to provide server-side GLX support.
An X module for wrapped software rendering (/usr/X11R6/lib/modules/libnvidia-wfb.so.x.y.z and optionally, /usr/X11R6/lib/modules/libwfb.so); this module is used by the X driver to perform software rendering on GeForce 8 series GPUs. If libwfb.so already exists, nvidia-installer will not overwrite it. Otherwise, it will create a symbolic link from libwfb.so to libnvidia-wfb.so.x.y.z.
An OpenGL library (/usr/lib/libGL.so.x.y.z); this library provides the API entry points for all OpenGL and GLX function calls. It is linked to at run-time by OpenGL applications.
An OpenGL core library (/usr/lib/libGLcore.so.x.y.z); this library is implicitly used by libGL and by libglx. It contains the core accelerated 3D functionality. You should not explicitly load it in your X config file -- that is taken care of by libglx.
Two XvMC (X-Video Motion Compensation) libraries: a static library and a shared library (/usr/X11R6/lib/libXvMCNVIDIA.a, /usr/X11R6/lib/libXvMCNVIDIA.so.x.y.z); please see Appendix N, XvMC Support for details.
A kernel module (/lib/modules/`uname -r`/video/nvidia.o or /lib/modules/`uname -r`/kernel/drivers/video/nvidia.o); this kernel module provides low-level access to your NVIDIA hardware for all of the above components. It is generally loaded into the kernel when the X server is started, and is used by the X driver and OpenGL. nvidia.o consists of two pieces: the binary-only core, and a kernel interface that must be compiled specifically for your kernel version. Note that the Linux kernel does not have a consistent binary interface like the X server, so it is important that this kernel interface be matched with the version of the kernel that you are using. This can either be accomplished by compiling yourself, or using precompiled binaries provided for the kernels shipped with some of the more common Linux distributions.
OpenGL and GLX header files (/usr/include/GL/gl.h, /usr/include/GL/glext.h, /usr/include/GL/glx.h, and /usr/include/GL/glext.h); these are also installed in /usr/share/doc/NVIDIA_GLX-1.0/include/GL/. You can request that these files not be included in /usr/include/GL/ by passing the "--no-opengl-headers" option to the .run file during installation.
The nvidia-tls libraries (/usr/lib/libnvidia-tls.so.x.y.z and /usr/lib/tls/libnvidia-tls.so.x.y.z); these files provide thread local storage support for the NVIDIA OpenGL libraries (libGL, libGLcore, and libglx). Each nvidia-tls library provides support for a particular thread local storage model (such as ELF TLS), and the one appropriate for your system will be loaded at run time.
The application nvidia-installer (/usr/bin/nvidia-installer) is NVIDIA's tool for installing and updating NVIDIA drivers. Please see Chapter 2, Installing the NVIDIA Driver for a more thorough description.
Problems will arise if applications use the wrong version of a library. This can be the case if there are either old libGL libraries or stale symlinks left lying around. If you think there may be something awry in your installation, check that the following files are in place (these are all the files of the NVIDIA Accelerated Linux Driver Set, as well as their symlinks):
/usr/X11R6/lib/modules/drivers/nvidia_drv.so /usr/X11R6/lib/modules/extensions/libglx.so.x.y.z /usr/X11R6/lib/modules/extensions/libglx.so -> libglx.so.x.y.z (may also be in /usr/lib/modules or /usr/lib/xorg/modules) /usr/lib/libGL.so.x.y.z /usr/lib/libGL.so.x -> libGL.so.x.y.z /usr/lib/libGL.so -> libGL.so.x /usr/lib/libGLcore.so.x.y.z /usr/lib/libGLcore.so.x -> libGLcore.so.x.y.z /lib/modules/`uname -r`/video/nvidia.o, or /lib/modules/`uname -r`/kernel/drivers/video/nvidia.o
If there are other libraries whose "soname" conflicts with that of the NVIDIA libraries, ldconfig may create the wrong symlinks. It is recommended that you manually remove or rename conflicting libraries (be sure to rename clashing libraries to something that ldconfig will not look at -- we have found that prepending "XXX" to a library name generally does the trick), rerun 'ldconfig', and check that the correct symlinks were made. Some libraries that often create conflicts are "/usr/X11R6/lib/libGL.so*" and "/usr/X11R6/lib/libGLcore.so*".
If the libraries appear to be correct, then verify that the application is using the correct libraries. For example, to check that the application /usr/X11R6/bin/glxgears is using the NVIDIA libraries, run:
% ldd /usr/X11R6/bin/glxgears linux-gate.so.1 => (0xffffe000) libGL.so.1 => /usr/lib/libGL.so.1 (0xb7ed3000) libXp.so.6 => /usr/lib/libXp.so.6 (0xb7eca000) libXext.so.6 => /usr/lib/libXext.so.6 (0xb7eb9000) libX11.so.6 => /usr/lib/libX11.so.6 (0xb7dd4000) libpthread.so.0 => /lib/libpthread.so.0 (0xb7d82000) libm.so.6 => /lib/libm.so.6 (0xb7d5f000) libc.so.6 => /lib/libc.so.6 (0xb7c47000) libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0xb6c2f000) libnvidia-tls.so.1 => /usr/lib/tls/libnvidia-tls.so.1 (0xb6c2d000) libdl.so.2 => /lib/libdl.so.2 (0xb6c29000) /lib/ld-linux.so.2 (0xb7fb2000)
Check the files being used for libGL and libGLcore -- if they
are something other than the NVIDIA libraries, then you will need
to either remove the libraries that are getting in the way, or
adjust your ld search path using the
LD_LIBRARY_PATH environment variable. You may wish
to consult the man pages for ldconfig and ldd.